Introduction And Technology Of Pressure Sensitive Bottle Cap Gasket

Pressure-sealed bottle cap gasket is referred to as pressure-sensitive bottle cap gasket. This kind of bottle cap gasket is used on glass bottles and various plastic bottles. The difference between it and ordinary bottle cap gasket is that this kind of bottle cap gasket Not in the cap, but sealed on the mouth of the bottle. Pressure-sealed bottle cap gaskets are produced from aluminum foil composite materials, which must be packaged using high-frequency induction heating equipment.

The pressure sensitive bottle cap gasket has the characteristics of simple operation, low price, convenient use and good sealing performance. This material is non-toxic and tasteless. The most practical is the seal of the medicine bottle. It is very simple to use, just put the CP20 sealing sheet into the bottom of the bottle cap (the printed side faces the bottom of the bottle cap), and then tighten the bottle cap. After about 2 hours, when the bottle cap is removed, the CP20 material has been tightly adhered to the bottle, which is suitable for the packaging of solid food and medicine, whether it is a glass bottle or a plastic bottle. The degree of adhesion depends on factors such as ambient temperature, cap pressure, etc.