l Advantages:
1. High density high quality newest material for PS foaming basic
2. Food contact safe thick pressure-sensitive adhesive
3. Dry surface with excellent sealing performance adhesive formula
CP-203 0.6mm thick Pressure sensitive seal liner Product introduction
CP-203 are sealing liner used to seal bottle openings. Their job is to block water and oxygen, protect the quality of the contents, and prevent them from oxidizing, getting damp, or going bad. This helps extend the product's shelf life.
You just put the cut pressure-sensitive gasket into the bottle cap, then screw the cap on tight. The pressure-sensitive adhesive on the gasket will melt a bit under pressure and seal the bottle opening firmly, creating a reliable sealing layer.
When the user opens the bottle cap, the gasket will stick to the opening. When they tear it off, the gasket will get slightly torn or deformed. This gives the product an untamperable feature, so people can easily tell if the product has been tampered with.
You just put the cut pressure-sensitive gasket into the bottle cap, then screw the cap on tight. The pressure-sensitive adhesive on the gasket will melt a bit under pressure and seal the bottle opening firmly, creating a reliable sealing layer.
When the user opens the bottle cap, the gasket will stick to the opening. When they tear it off, the gasket will get slightly torn or deformed. This gives the product an untamperable feature, so people can easily tell if the product has been tampered with.
Applications
- Cosmetic. Medicines. Food.
What is the MOQ for custom printing?
It is 3,000 m2.
What is the MOQ for custom thickness?
It is 5,000 m2.
Can you cut it to the width that suit for me?
Yes.
Features and characteristics
Detailed introduction
l Structure:
l How to use:
1. Place the liner (printed side up) on the opening or inside the cap,
2. Screw the cap on tightly (giving an extra twist to activate the adhesive),
3. Wait 24-48 hours for it to bond.
4. Open the cap, the liner sealing already done.
l Specification:
|
Weight: |
240g/m3 |
|
Thickness: |
0.6mm ± 0.1mm |
|
Printing: |
SEALED for YOUR PROTECTION |
|
Bottle material: |
both |
|
Content material: |
solid; powder; cream |
|
Sealing method: |
Pressure seal (provided by tightening the bottle cap) |
|
Storage conditions: |
0~40 centigrade; Store in a cool and dry place. |
|
Expiration date: |
3 years |
l Packaging：
1. Roll form
pack in cartons
core size: 7.5cm
75m2/roll
2 reel/box
Box size: 54/54/73cm
2. Discs form
Pack in tube
500~600 pcs/tube
Box size: 50/40/35cm
l Customization scope:
1. Printing
2. PS foam thickness
3. Die cut diameter
4. Roll width
5. Packaging
